.

What you need to get started:

• An account with TotalDialUp.com
• Your username
• Your password
• Your local access number
• The primary & secondary DNS numbers

iMAC - Step 1

Open up the Assistants folder and double click on the Internet Setup Assistant icon.
Click on Yes to continue.

iMAC - Step 2

Click on Yes to continue.

iMAC - Step 3

Click the right arrow to continue.

iMAC - Step 4

You will need to enter in a name for this configuration. Also ensure that modem is checked before continuing.
Enter in the name as shown above, and click the right arrow to continue.

iMAC - Step 5

Select the modem you are using from the drop down list above. Ensure you have the correct port selected and tone is selected and then click on the right arrow to continue.

iMAC - Step 6

Enter in your Local Call Access number, your username and your password in the spaces provided ( as shown above ). Once you have done this, click on the right arrow to continue.

iMAC - Step 7

Ensure that No is checked and click on the right arrow to continue.

iMAC - Step 8

There is no IP Configuration so ensure No is selected and click on the right arrow to continue.

iMAC - Step 9

Enter in the DNS addresses as shown above, as well as the Domain Name as shown above and then click the right arrow to continue.

iMAC - Step 10

Enter in your email address and your password in the spaces provided ( as shown above ) and click on the right arrow to continue.

iMAC - Step 11

Enter in the POP as shown above and ensure you replace your-username with your username and you will also need to enter in the SMTP of which details are shown in the above graphic.
Once you have done this, click on the right arrow to continue.

iMAC - Step 12

Enter in the News address in the space provided ( as shown above ) and click on the right arrow to continue.

iMAC - Step 13

You have now finished configuring your iMAC for connection to the internet. To complete your Internet Settings, click Go Ahead. To connect later, you can either use the Remote Access section of the Control Strip, or you can use the Remote Access Control Panel.